Request a quote
Send a few details and we'll come back with the next step. The more you tell us about the door, the tighter the estimate.
Prefer to talk? (909) 247-3759 · 650 Cliffside Dr, San Dimas, CA 91773
Get in touch
You can reach us at 19092473759 or come by 650 Cliffside Dr, San Dimas, CA 91773. The fastest way to get a number that actually holds up is to have a few things ready before you call: the age of your house if you know it, whether the door is a single or double, and what the opener is doing (or not doing) right now.
A lot of houses on this side of San Dimas went up between 1943 and 1987, with most of that stock landing in the 1960s and 70s. That matters for pricing because a door from that era often runs on hardware nobody stocks new anymore - odd-width tracks, older torsion drums, spring winding cones that don't match what's on the shelf at the supply house today.
Telling us the rough age of your house on the phone saves a trip where we show up and just confirm what we already suspected. We quote by phone or in person, but a phone quote is always a range, not a number.
If you want the firm number, the door has to get looked at. There's no way around that part, and we'd rather tell you that up front than give you a figure that falls apart once a tech has eyes on the track.
Our team
Serving San Dimas, CA
The person who answers your call is the same kind of person who shows up at your door - someone who works on garage doors, full stop, not a dispatcher reading a script. We don't subcontract the repair out to whoever's free that day in a different part of the county.
We work across San Dimas and into the nearby communities - La Verne, about 2 miles off, Claremont and Walnut around 6 miles out, and farther out toward Montclair, Vincent, and the rest of the areas within roughly a 20-mile stretch. If you're not sure whether your address falls inside that range, just ask when you call.
We don't put a number on how many people are on the crew or how long the company's been doing this, because that's not information we're putting on this page one way or the other. What we can tell you is what the job actually involves and what it'll take to fix what's in front of us.
Our limits
We will not give you a locked-in price over the phone for anything beyond a basic service call. Springs, cables, and openers all have enough variables - brand, age, how the door was installed originally - that a real number needs a real look.
We will not tell you a 1960s or 70s door is a quick fix if it isn't. On a house from that era, once the track is bent or the panel's rusted through at the bottom, patching it usually costs more over time than replacing the section or the door.
We'll say so rather than keep selling you parts. We will not recommend replacing a door that's doing fine just because it's old. Age alone isn't a reason to spend money.
If the spring's dead and the panels are straight, we fix the spring. And we will not show up without being asked. If you want a quote, call or come by. We don't do unsolicited estimates or door-knocking.
Common jobs
Most of the calls we get track pretty closely to the housing stock out here. Homes built between 1943 and 1987 - median right around 1963 - tend to have original or near-original hardware: single torsion springs wound tighter than today's doors call for, steel tracks that have shifted slightly over sixty years of settling, and openers that have been swapped once or twice but never matched properly to the door weight.
The climate here runs on the moderate-heat side, which isn't brutal on doors the way a harsher climate would be, but steady heat still dries out lubrication on rollers and hinges faster than people expect, and it can warp thinner wood panels over the years if they're not sealed.
With a service area that includes 83,946 owner-occupied houses and a median household income north of $100,000, a fair number of owners are weighing repair against full replacement on doors that are decades old - and for a lot of them, a clean spring and roller job is enough to get another decade out of the door. We'll tell you honestly which side of that line your door's on.
Questions
We can give you a range if you tell us the door type, rough age of the house, and what's going wrong. A firm number needs a look at the door - springs, tracks, and opener wiring vary enough between houses built in different decades that a phone quote alone isn't reliable.
Yes. A lot of houses in this area were built in the 1960s and 70s and still have original or older torsion hardware. We work on those regularly, though some parts for very old setups may need to be special-ordered rather than pulled off a shelf.
We cover San Dimas and nearby areas including La Verne, Claremont, and Walnut, out to roughly 20 miles depending on the job. If you're unsure whether your address is in range, call 19092473759 and ask before you schedule.
Depends on the door. If the panels and track are straight and it's just a dead spring or worn rollers, repair usually makes sense. If the track's bent or panels are rusted through, replacement often costs less over time. We'll tell you which applies once we see it.
Ready when you are
San Dimas Garage Door Pros repairs and installs garage doors, springs and openers in San Dimas, CA and the surrounding area.
